BP900/BP200 Event
3 min
the bp900 and bp200 events trigger when a bp900 or bp200 button is pressed the bp900 and bp200 button panels https //www brightsign biz/digital signage products/accessories/usb 4 buttons panels are led based touch devices that allow you to add button interactivity to brightsign players with a usb port enumeration there are a total of eight event icons bp900a, bp900b, bp900c, bp900d, along with bp200a, bp200b, bp200c, and bp200d the letters a, b, c, and d correspond to usb ports if the event you are defining is for a button pad connected to usb port a, use "a" if it is for a button pad connected to the second port, use b example an xd1134 has two available usb ports if you want to connect two button boards, a bp900 to port a and a bp200 to port b, you would use the bp900a and bp200b icons to define events for each you can use a usb hub to connect up to four bp900/bp200 button panels to a brightsign player see this guide docid\ ydeh8qocvkymgj2kdxn7l to learn more about bp900/bp200 enumeration on usb hubs event properties specify button number select a button on the button pad that you want the user to press to transition to the next state selecting any button will enable only the button numbers used in other bp200 or bp900 events in the presentation (or numbers enabled in the presentation settings > interactive > touch docid\ a6ali6u szxhuansk6t3 section) for example, if you have defined bp900 events for buttons 1 and 4, a bp900 event set to any button will trigger for buttons 1 and 4 only press (first touch) the event triggers once at the moment the button is pressed press continuous the event triggers the moment the button is depressed, then continues triggering at the specified repeat interval in milliseconds as long as the button is depressed