XD5 Environmental & Power

environmental the xd235 and xd1035 are designed for sustained ambient temperatures between 0°c and 50°c, with transients up to 60°c (at 90% maximum relative humidity, non condensing) non operational (transportation or storage) temperatures can range from 20°c to 85°c units should be allowed time to acclimate before being powered up operating the players above 50°c ambient for prolonged periods may reduce the operational life of the product and result in intermittent resetting of the device exposing a cold player to warm air at high relative humidity may cause water to condense inside the player, leading to component failure damage due to such internal condensation is not covered by warranty if a player is cold, allow several hours for it to acclimatize to ambient conditions before applying power power power adapter the xd235 and xd1035 are supplied with 12v\@3a power supply an additional 2a of power is available for peripherals connected to the player the user should not connect any combination of peripherals that will exceed 2a draw if more than 2a is drawn, the external power supply may shut down due to over current conditions the unit will not be damaged, but it may reboot or not operate properly until the overload is removed if the device is being powered by the power supply, the 2a can be shared in any way among the following connectors connector maximum power usage rj 45 approx 180ma (when transferring data) usb 2 0 (type c) 1a usb 2 0 (type a) 1 5a gpio 3 3v 500ma hdmi® 5v 70ma ir blaster output 85ma m 2 wi fi module, m 2 ssd module 3v3 the combined power of these expansion ports should not exceed 3 5a poe type 1 when the player is powered via type 1 poe, the total available power is reduced to 12w this means that each usb port supplies 100ma of power (one unit load for usb 2 0) this is sufficient for low power devices such as memory sticks and mice high power devices such as hard disks will not operate