HD226, HD1026
BrightSign Series 6 players can be used to decode images, audio, and video for digital-signage and kiosk applications. They have the following new features:
- Improved video and graphics performance
- A 100 Base-T Ethernet port (in addition to the standard 1000 Base-T port) for remote control of attached displays and identification
- This port is not enabled by default and must be explicitly enabled from the BrightSign shell prompt, JavaScript, or BrightScript. See roNetworkConfiguration or networkconfiguration for more info.
- An internal microSD card reader (in addition to the external reader) for greater security
- A SIM card slot
- An M.2 slot for SSD storage (XD models only)
- An M.2 connector for Wi-Fi
- An M.2 connector for an internal cellular modem for wireless 4G networking
- Only one wireless module (Wi-Fi or cellular) can be fitted at a time, since there is only one set of SMA antenna connections.
Players can be controlled with various networked and built-in interfaces and include a Real Time Clock (RTC) with a supercapacitor that backs up the clock settings when the player is power cycled.
Interfaces
HD226
FRONT | BACK |
|---|---|
WiFi antenna connector (1 of 2) for WiFi or cellular modem | 12V 3A power supply |
Ethernet (Control) | Service button (SVC) |
IR in/out | Reset button (Reset) |
3.5mm audio out (combo) | HDMI® out |
GPIO (16 pins) | micro-SD card slot |
4 Status LEDs | Ethernet (RJ45 LAN) |
WiFi antenna connector (2 of 2) for WiFi or cellular modem | |
HD1026
FRONT | BACK |
|---|---|
WiFi antenna connector (1 of 2) for WiFi or cellular modem | 12V 3A power supply |
Ethernet (Control) | Service button (SVC) |
IR in/out | Reset button (Reset) |
3.5mm serial | HDMI® out |
3.5mm audio out (combo) | USB A 2.0 port |
GPIO (16 pins) | micro-SD card slot |
4 Status LEDs | Ethernet (RJ45 LAN) |
WiFi antenna connector (2 of 2) for WiFi or cellular modem | |
