Series 6 Environmental & Power
Environmental
Series 6 players are designed for sustained ambient temperatures between 0°C and 50°C, with transients up to 60°C (at 90% maximum relative humidity, non-condensing). Non-operating (transportation or storage) temperatures can range from −20°C to 85°C.
Operating the players above 50°C ambient for long periods may shorten the product’s operating life and cause the player to reset intermittently.
Exposing a cold player to warm, humid air can cause water to condense inside it, which can lead to component failure. Damage from internal condensation is not covered by the warranty. If a player is cold, allow several hours for it to adjust to room conditions before connecting power.
Power
Power Adapter
Players include a 12V @ 3A power adapter.
Power Budget
The following table lists the estimated power available to each port and module:
Port / Module | Estimated Power Budget |
|---|---|
USB-A / USB-C (HD1026, XD1036 only) | 5V @ 1.5A per port |
GPIO | 3.3V @ 0.5A |
Wi-Fi module | 3.3V @ 0.8A |
Cellular modem | 3.3V @ 0.8A |
SSD (XD models only) | 3.3V @ 0.8A |
PoE (XD models only)
XD models can be powered by Power over Ethernet (PoE) instead of the power adapter. When powered by PoE Type 2, the player has the full power budget shown above.
When powered by PoE Type 1, total available power drops to 12W. Each USB port then supplies only 100mA, which is one USB 2.0 unit load. That is enough for low-power devices such as flash drives and mice. High-power devices such as hard drives will not work.