Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

There are four on-board LEDs that indicate the following:

LED

Indication

Green power (Pwr)

Displays when the board is powered up and not in reset mode. Flashes during the firmware update process.

Green file-system activity (Bsy)

Flashes any time there is file-system activity (on any storage device)

Blue WiFi (Image Modified)

Flashes when the player is connecting to the wireless network. Displays when connected.

Red status (Err)

Flashes a certain number of times to indicate which error is occurring. The flash codes are described below.

2

Unspecified error

3

Network recovery script is preparing to run on a device configured for network recovery.

4

No upgrade file found.

5

Failed to load kernel module.

6

Board is not capable of running the current firmware version.

7

A piece of on-board hardware is not working correctly.

8

Problem related to the storage device (either the USB drive or microSD card)

9

Problem related to the registry/NAND

10

The autorun script encountered a load/run error.

11

WiFi-related error

12

Unable to find a bootable image.

 

On-Board Switch

The on-board switch is connected to the GPIO12, which is pulled low when the service (SVC) button is pressed. Conversely, a pull-up on the button normally sets the GPIO12 to be pulled high.

...

The XT243 and XT1143 have an internal M-keyed M.2 slot for ATAPI SSD drives. See this page for all SSD specifications.