Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.

All BrightSign players offer serial I/O for diagnostic and interactive capabilities. Many models have a dedicated serial port (either DE9 or 3.5mm), and USB ports can be used for serial communication as well. This page outlines how to configure the player and host device for serial communication.


Because it uses 0V/+5V signalingWhile the DE9 port supports RS-232 communication, the 3.5mm serial port does not interoperate with some RS-232 devices because it uses 0V/+5V signaling. It can receive from any RS-232 device, but transmission may not work depending on the electrical characteristics of the device.


  • Baud rate: 115200
  • Data: 8 bit
  • Parity: none
  • Stop: 1 bit
  • Flow control: noneHardware flow control is available on the 4Kx42, XDx32, and HDx22 (software flow control is not supported on any model).

Port Enumeration

Most standard serial devices connected to the DE9 or 3.5mm port will enumerate on port 0 of the player (on the HO523 player, they will enumerate on port 1).